91看片

OR
Shopping Cart(0)
Help Center  
Customer Service
How to order Service & Refunds
Sending a message
JS@pcbasic.com
Open Hours：9:00-21:00 (GMT+8)
Service hotlines
+86-755-27218592

9:00 -18:00, Mon. - Fri. (GMT+8)

9:00 -12:00, Sat. (GMT+8)

(Except Chinese public holidays)

X
Home > Pcbasic FAQ > Technical Support > Design Instruction

PCBasic Panel Requirements for Tab-Route Design

For panelization by tab-route, PCBasic follows strict design standards to ensure smooth assembly and reliable depaneling:

 

?  A 2.0 mm clearance is required between each individual PCB.

 

?  The connection tabs between boards should be wider than 1.6 mm to maintain structural strength during processing.

 

?  Each tab should include stamp holes with a 0.45 mm diameter and 0.35 mm spacing to make depaneling easier and cleaner.

 

Following these guidelines helps achieve better production stability and prevents PCB damage during separation.

Get an Instant Quote Now
?

Phone contact

+86-755-27218592

In addition, we've prepared a Help Center. We recommend checking it before reaching out, as your question and its answer may already be clearly explained there.

?

Wechat Support

In addition, we've prepared a Help Center. We recommend checking it before reaching out, as your question and its answer may already be clearly explained there.

?

WhatsApp Support

In addition, we've prepared a Help Center. We recommend checking it before reaching out, as your question and its answer may already be clearly explained there.